Fiberlock's AfterShock is an EPA-registered antimicrobial coating designed to kill residual mold and mildew remaining after pre-cleaning contaminated surfaces. AfterShock also inhibits the future growth and spread of mold and mildew on the cured film surface in residential and institutional buildings. This extremely durable, easy to apply, 100% acrylic sealant offers the ultimate in durability in combination with excellent fungicidal characteristics to address mold growth from water damage. AfterShock is recommended for use on interior wall surfaces such as plaster, wallboard, drywall, concrete, masonry block, wood, primed metal and galvanized metal. AfterShock is also recommended for use on interior wood framing, primed metal, concrete, and wallboard inside the wall cavity.

The First Coating EPA Registered To Kill Mold!

• Aftershock Fungicidal Coating, the first of its kind, actually kills mold on pre-cleaned surfaces
• AfterShock is an EPA-registered antimicrobial coating designed to kill residual mold and mildew remaining after pre-cleaning contaminated surfaces
• AfterShock also inhibits the future growth and spread of mold and mildew on the cured coating film in residential and institutional buildings
• This extremely durable, easy to apply, 100% acrylic sealant provides excellent fungicidal characteristics to address mold growth from water damage
• AfterShock is recommended for use on interior wall surfaces such as plaster, wallboard, drywall, concrete, masonry block, wood, primed metal and galvanized metal
• Not for use in HVAC systems

3-Step Process for Flood & Water Damage:

Step 1: CLEAN
Thoroughly clean all surfaces with Fiberlock Advanced Peroxide Cleaner (8314)

Step 2: KILL
Disinfect/Sanitize surfaces to kill bacteria and other microbial organisms that remain on the surface after cleaning with ShockWave Concentrate (8310) or ShockWave RTU (8316)

Step 3: COAT
To prevent the regrowth of mold and provide long lasting protection with Aftershock (8390), IAQ 6000 White (8360), or IAQ 6100 Clear (8361)

Coverage:

• Smooth Surface: 250-400 ft2/gal
• Porous Surface: 150-300 ft2/gal

Drying Times (@ 70 - 77°F , 50% R.H.):

• To Touch: 1 hour
• To Recoat: 4 hours
• Minimum Application Temp: 50 degrees F (10 degrees C)

Product Specifications:

• Std Pkg UoM: Gallon
• Std Pkg Qty: 1 Gal
• Price Unit: EA
• Solids By Weight: 42.0%
• Solids By Volume: 32.7%
• Viscosity At 70: 95-100 Kreb Units
• Specular Gloss: 60ø ñ 5 @60ø
• Flash Point: Non-combustible
• Shelf Life: 36 Months Min. (Original Sealed Container)
• Calculated Voc: 100 Grams/liter

Product Testing:

• EPA Registration Number: 73884-1
• EPA Est. Number: 73884-MA-1
• Water Vapor Permeance: 2.9 perms