Gasket for 55 Gallon Cover: HV-55-11
HafcoVac
HV-55-11
$40.00
This gasket is to be affixed on the bottom of a 55 gallon head It creates the seal between the lip of the drum and the head Made of 1/4" neoprene This gasket has a self-adhesive peel off backing for...
Caster Base for 30 Gallon Drum: HV-30-20
HafcoVac
HV-30-20
$160.00
This base will fit any standard 30 gallon drum Constructed of heavy-duty steel, it has 4 casters to facilitate easily moving your vacuum about your facility
Drum (30 Gallon): HV-30-15 (lid sold separately)
HafcoVac
HV-30-15
$195.00
This HafcoVac drum is 18 gauge (1.1 mm nominal thickness) heavy-duty steel
Drums for use with HafcoVac heads must be no thinner than 18 gauge, or risk drum implosion
This drum no longer has a...
Drum Cover for 30 in. Hafcovac Vacuum: HV-30-10
HafcoVac
HV-30-10
$255.00
This cover is intended to replace a cover for any HafcoVac head
It is pre-drilled to accept the HafcoVac venturi box and inlet elbow
It does NOT include gaskets
30 Gallon Anti-Static Poly Drum Liner, 10mil: HV-30-16
HafcoVac
HV-30-16
$20.00
Our flexible round bottom anti-static drum liners and pail liners are manufactured using an anti-static additive to assist in dissipating and reducing static charge and static build-up that can...
Compressed Air Vac. w/ 1.5" Hose Kit , 30 Gal: HV-30-1510V
HafcoVac
HV-30-1510V
$1,280.00
Specs:
Vacuum Head, Grounded
18 gauge (1.1mm) 30 gallon Drum, Grounded
4-wheel Steel Caster Base
HEPA Filtration
Static conductive vacuum hose w/wire
Wet/Dry Floor Tool with 4'...
Compressed Air Vac. w/ 2" Hose Kit , 30 Gal: HV-30-2010V
HafcoVac
HV-30-2010V
$1,420.00
Specs:
Vacuum Head
18 gauge (1.1mm) 30 gallon Drum
Caster Base
25' of standard Vacuum Hose
Wet/Dry Floor Tool with 4' Wand,
Crevice Tool
20' of 2" I.D...
Jack Tool Holder (30 Gallon Vacuum)
HV-7100-30
$335.00
The JACK Tool Holder: Fits 30 gallon drum Fits 1.5 or 2 inch tools Made from Steel, built to last Sturdy, innovative steel construction Air Line Hose...
Elbow Gasket: HV-7054
HafcoVac
HV-7054
$12.00
This gasket creates a seal underneath the inlet elbow on the top of the head Holes are pre-drilled to facilitate easy installation
