*Please note this is for a 5 Gallon Bucket.*

LBC Lead Barrier Compound (Type III - Interior/Exterior)is a thermoplastic-elastomeric water based copolymer blended speci cally to form a barrier between lead-based paint and the environment. It is a high-solids coating formulated to o er unparalleled coverage, economics and aesthetics while preserving historic and architectural detail. LBC contains Bitrex®, a bitter-tasting ingredient to discourage oral contact with lead paint. LBC Complies with all EPA and HUD requirements for lead-based paint encapsulants and is recognized as a permanent method for abatement of lead-based paint. LBC meets all Federal, State and Local standards for lead based paint encapsulants. LBC has been independently tested at David Litter Laboratories, and was found to meet/surpass the ASTM E-1795 Standard for Lead-Based Paint Encapsulants for both indoor and outdoor use. LBC is certi ed for use in all 50 states.

Save time and money by encapsulating that lead paint!

• Avoid Costly Removal of Lead Based Paint by Using LBC!

• LBC is approved in all 50 states for use as a permanent lead based paint encapsulant

• Current estimates indicate that 38 million homes built before 1978 contain lead based paint

• LBC is a safe and effective alternative to the costly process of lead based paint removal and is accepted in all 50 states as a permanent lead abatement method

• LBC Lead Barrier Compound (Type III - Interior/Exterior) is a thermoplastic-elastomeric water based copolymer blended specifically to form a barrier between lead based paint and the environment

• It is a high-solids coating formulated to offer unparalleled coverage, economics and aesthetics while preserving historic and architectural detail

• LBC contains Bitrex, a bitter-tasting, nontoxic ingredient to discourage oral contact with lead paint

• LBC Complies with all EPA and HUD requirements for lead based paint encapsulation

• LBC has been independently tested at David Litter Laboratories, and was found to meet/surpass the ASTM E-1795 Standard for Lead-Based Paint Encapsulants for both indoor and outdoor use

• LBC can be successfully applied to the proper thickness in one application with most major brands or airless spray equipment

• LBC can also be applied by brush or roller

• LBC can be used for application with surface temperatures as low as 50 øF

• LBC replaces the product ChildGuard 

• Permanent solution appropriate for interior and exterior use

• Impact-resistant

• Inexpensive

• 20 year warranty

• Can be tinted with up to two ounces per gallon of universal colorant

• Easy to apply with a brush or roller

• 2 coats (7 dry mils) per application

• Water-based easy clean up

• Safe, nontoxic. Meets all HUD & EPA guidelines

• Architectural Matte

• Class "A" fire-rated

• Certified or approved for use in all 50 states

• Washable & can be painted over

Coverage:

• Smooth Surfaces: 120 ft2 /gal
• Porous Surfaces: 80-120 ft2 /gal

Drying Times (@ 70 - 77°F , 50% R.H.):

• To Touch: 1-2 hours
• To Recoat: 8-16 hours
• Minimum Application Temp: 45ºF (7.2ºC)

Product Specifications:

• Std Pkg UoM: 5 Gallon Container
• Std Pkg Qty: 5 Gallons
• Solids by Weight ± 2%: 59.0%
• Solids by Volume ± 2%: 45.0%
• Viscosity at 70°F: 95-120 Kreb Units
• Specular Gloss: 5.5º ± 1 @ 60º
• Flash Point: Non-combustible
• Shelf Life: 24 Months Min. (Original Sealed Containers)
• Calculated VOC: 88 grams/liter