Lead Shield is a water based 100% acrylic lockdown with a dual purpose; it binds residual lead-based paint (LBP) and dust present after removal; and accepts most topical coverings. Lead Shield is a one-step product which bonds to most surfaces eliminating the need for sanding, priming and sizing recently stripped walls. Lead Shield can be used on both interior and exterior surfaces, and was expressly formulated to prepare these surfaces to accept a final topical covering. Lead Shield should not be used as a substitute for encapsulation. The clear version of this product sprays on white and dries clear to permit visual inspection of any residual paint. Lead Shield is also available in translucent blue which speeds up the post removal inspection process. The blue tint enables an inspector to quickly identify areas that LBP has been removed from and subsequently locked down. These unique features assist in obtaining final LBP removal certification.

Made from the finest materials to keep you safe!

• Lockdown Residual Lead-Based Paint and Dust Present After Removal!
• Lead Shield is a water based 100% acrylic lockdown with a dual purpose; it binds residual lead-based paint and locks down lead dust present after removal
• Lead Shield also accepts most topical coverings
• Lead Shield's unique features assist in obtaining final LBP removal certification
• Lead Shield is a water based 100% acrylic lockdown with a dual purpose; it binds residual lead-based paint and dust present after removal; and accepts most topical coverings
• The clear version of this product sprays on white and dries clear to permit visual inspection of any residual paint
• The translucent blue tint speeds up the post removal inspection process after the product has fully cured
• The blue tint is advantageous because it enables an inspector to quickly identify areas that LBP has been removed from and subsequently locked down
• These unique features assist in obtaining final LBP removal certification
• Lead Shield is a one step product which bonds to most surfaces eliminating the need for sanding, priming and sizing recently stripped walls
• Lead Shield can be used on both interior and exterior surfaces, and was expressly formulated to prepare these surfaces to accept a final topical covering
• Lead Shield should not be used as a substitute for encapsulation

Coverage:

• Smooth Surfaces: 450 ft2 /gal
• Porous Surfaces: 100-300 ft2 /gal

Drying Times (@ 70 - 77°F , 50% R.H.):

• To Touch: 30 minutes
• To Recoat: 2 hours
• Min. Application Temperature: 50ºF (10ºC)

Product Testing:

• Fire Rating: ASTM E84 Class A
• Flame Spread: 5
• Fuel Contribution: 0
• Smoke Density: 15

Product Specifications:

• Std Pkg UoM: 5 Gallon Container
• Std Pkg Qty: 5 Gallons
• Solids by Weight ± 2%: 29.0%
• Solids by Volume ± 2%: 26.1%
• Viscosity at 70°F: 85-90 Kreb Units
• Specular Gloss: 35-40º @ 60º
• Flash Point: Non-combustible
• Shelf Life: 36 Months Min. (Original Sealed Containers)
• Calculated VOC: 96 grams/liter