Yes! - You can order in less than case quantities. We're one of the few to sell by the quart! 

LeadSafe Lead Dust Cleaner is a concentrated product designed specifically to assist in the cleanup of lead dust after lead abatement projects, construction, renovation or any other activity which disturbs lead and creates dust. This product has been formulated to remove more lead dust than ordinary cleaning products. LeadSafe Cleaner utilizes chelating agents similar to those given to individuals with lead poisoning. These chelating agents bind to the lead dust and help hold it in suspension so that it can be easily rinsed away.

A Convenient, Easy To Use Solution for Lead Dust Cleaning

• LeadSafe Lead Dust Cleaner contains chelating agents similar to those given to individuals with lead poisoning
• The last and possibly most critical step in any lead abatement job is clean-up
• With LeadSafe Lead Dust Cleaner this process can be easier than ever
• LeadSafe cleaner utilizes chelating agents similar to those given to individuals with lead poisoning
• LeadSafe Lead Dust Cleaner is a concentrated product designed specifically to assist in the cleanup of lead dust after lead abatement projects, construction/renovations or any other activities which is likely to generate lead dust
• This product has been formulated to keep in suspension more lead than ordinary cleaning products
• The chelating agents in Lead Safe Dust Cleaner lift the lead from the surface and bind to the lead dust

Product Specifications:

• Std Pkg UoM: 1 Quart or 1 Gallon
• Std Pkg Qty: 1 Gallon
• Active Ingredient:Proprietary chelating agents
• Odor: Slight Odor
• Color: Light Green
• Flash Point: Non-combustible
• Shelf Life: 32 Months Min. (Original Sealed Container)

Application Information Product Data Sheet Properties Product Specifications Active Ingredient:Proprietary chelating agents Odor: Slight Odor Color: Light Green Flash Point: Non-combustible Shelf Life: 32 Months Min. (Original Sealed Container) Available Package Sizes 1 Quart 1 Gallon LeadSafe™ Lead Dust Cleaner - Formulated to Control & Remove Lead Dust LeadSafe Lead Dust Cleaner is a concentrated product designed specifically to assist in the cleanup of lead dust after lead abatement projects, construction, renovation or any other activity which disturbs lead and creates dust. This product has been formulated to remove more lead dust than ordinary cleaning products. LeadSafe Cleaner utilizes chelating agents similar to those given to individuals with lead poisoning. These chelating agents bind to the lead dust and help hold it in suspension so that it can be easily rinsed away. 5496 DILUTION Dilute 6-7 oz. per gallon of water. (One 32 oz. bottle will make 5 gallons) (One gallon will make 20 gallons). One gallon of diluted product will clean approximately 500 square feet of hard, non-porous surfaces. CLEANING PROCEDURE Clean and remove all belongings from the area to be cleaned. Prior to application use a HEPA filtered vacuum on all surfaces. Starting at the end farthest from the exit, vacuum the room towards the exit beginning at the top of each room and working down. When applying the cleaning solution start in a far corner working towards the exit of the room to avoid re-contamination of the cleaned areas. Always wear appropriate personal protective equipment (PPE) including gloves and eye protection during any lead abatement or cleanup activity. See warnings below for additional precautions. Three Bucket Cleaning System: By following this system you will minimize the risks of reintroducing lead back into the cleaned environment. Bucket 1 – Contains uncontaminated LeadSafe cleaner solution. Bucket 2 – This bucket is empty and will be used to hold all dirty water. Bucket 3 – Contains clean water for rinsing. 1. Using a mop, rag or sponge dip into bucket #1 and begin cleaning surfaces until clean. 2. Ring out mop, rag or sponge into bucket #2 and return to bucket #1 for more cleaning solution. 3. Use clean water from bucket #3 to rinse surfaces. 4. Replace cleaning solution and rinse water when dirty. For tough to clean surfaces including porous surfaces use warm water when mixing the solution and allow the product to sit for 10 minutes prior to cleaning.