Name: Pelsue Tent Heater
Brand: Pelsue
SKU: 1557
Price: 995 USD
Availability: InStock

Description

Tent Heaters

The Model 1557 is a radiant style, portable, infrared construction heater. It is adjustable from 8,000 to 16,000 BTU’s. This patented design provides clean, efficient heat for Pelsue work tents or any other ventilated space. Safety features include thermal sensor and tip over protection.

No electrical power required.

1557
Certifications: CSA
Dimensions: 9.5"W x 13"L x 20"H
Weight: 13 lbs.
BTUs: 8'000 - 16'000
Propane Usage - low: 0.25 lbs./hr. (low setting)
Propane Usage - high: 0.50 lbs./hr. (high setting)
Included: 10' hose

1557B
Certifications: CSA
Dimensions: 9.5"W x 13"L x 20"H
Weight: 13 lbs.
BTUs: 8'000 - 16'000
Propane Usage - low: 0.25 lbs./hr. (low setting)
Propane Usage - high: 0.50 lbs./hr. (high setting)
Included: 20' hose and regulator

1557C
Certifications: CSA
Dimensions: 9.5"W x 13"L x 20"H
Weight: 13 lbs.
BTUs: 8'000 - 16'000
Propane Usage - low: 0.25 lbs./hr. (low setting)
Propane Usage - high: 0.50 lbs./hr. (high setting)
Included: 25' hose and regulator

1557D
Certifications: CSA
Dimensions: 9.5"W x 13"L x 20"H
Weight: 13 lbs.
BTUs: 8'000 - 16'000
Propane Usage - low: 0.25 lbs./hr. (low setting)
Propane Usage - high: 0.50 lbs./hr. (high setting)
Included: No gas hose included

Propane Usage Chart
1557: Heat Setting - Low, PSI Input - 10, LBS/hr - 1/4, 20 LB Tank - 80 hrs., BTU - 8,000
1777: Heat Setting - High, PSI Input - 10, LBS/hr - 1/2, 20 LB Tank - 40 hrs., BTU - 16,000

NOTE:Results are based on in-house testing. Consumer results may vary.

Hazardous Location Basics
Hazardous Location
An area where the possibility of explosion and fire is created by the presence of flammable gases, vapors, dusts, fibers, or flyings.
Class I (NEC-500-5)
Those areas in which flammable gases or vapors may be present in the air in sufficient quantities to be explosive or ignitable.
Class II (NEC-500-6)
Those areas made hazardous by the presence of combustible dust.
Class III (NEC-500-7)
Those areas in which there are easily ignitable fibers or flyings present, due to type of material being handled, stored, or processed.
Division 1 (NEC-800-5, 6, 7)
Division One in the normal situation, the hazard would be expected to be present in everyday production operations or during frequent repair and maintenance activity.
Division 2 (NEC-500-5, 6, 7)
Division One in the abnormal situation, material is expected to be confined within closed containers or closed systems and will be present only through accidental rupture, breakage or unusual faulty operation.
Groups (NEC-500-3)
The gases and vapors of Class I locations are broken into four groups by the code A, B, C, and D. These materials are grouped according to the ignition temperature of the substance, its explosion pressure, and other flammable characteristics. Class II-Dust locations-groups E, F, and G. These groups are classified according to the ignition temperature and the conductivity of the hazardous substance.
Seals (NEC-501-5 & 502-5)
Special fittings that are required either to prevent the passage of hot gases in the case of an explosion in a Class I area or the passage of combustible dust, fibers, or flyings in a Class II or III area.
Articles 500 - 503 (1987 NEC)
Explains in detail the requirements for the installation of wiring or electrical equipment in hazardous locations. These articles along with other applicable regulations; local governing inspection authorities, insurance representatives, and qualified engineering/technical assistance should be your guides to the installation of wiring or electrical equipment in any hazardous or potentially hazardous location.
Typical Class I Locations:
· Petroleum refineries, and gasoline storage and dispensing area.
· Industrial firms that use flammable liquids in dip tanks for parts cleaning or other operations.
· Petrochemical companies that manufacture from gas and oil.
· Dry-cleaning plants where vapors from cleaning fluids can be present.
· Companies that have spraying areas where they coat products with paint or plastics.
· Aircraft hangers and fuel servicing areas.
· Utility gas plants, and operations involving storage and handling of liquefied petroleum gas or natural gas.
Typical Class II Locations:
· Grain Elevators, flour and feed mills.
· Plants that manufacture, use or store magnesium or aluminum powders.
· Plants that have chemical or metallurgical processes…producers of plastics, medicines, and fireworks, etc.
· Producers of starch or candies.
· Spice-grinding plants, sugar plants, and cocoa plants.
· Coal preparation plants and other carbon-handling or processing areas.
Typical Class III Locations:
· Textile mills, cotton gins, cottonseed mills, and flax processing plants.
· Any plant that shapes, pulverizes, or cuts wood and creates sawdust or flyings.
Note: Fibers and flyings are not likely to be suspended in the air, but can collect around machinery or on lighting fixtures and where heat, sparks, or hot metal can ignite them.

About Pelsue

Pelsue is the premier manufacturer of ventilation equipment. Based in Englewood, CO, Pelsue has been building and designing ventilation equipment since 1963.

Pelsue Interlocking Series Tents

Pelsue

Interlocking Series

$924.00 - $4,100.00

The interlocking flaps allow you to connect two tents together, or attach the tent to a work vehicle. The interlocking flaps are a great way to get extra functionality out of your tent. Main...

Quantity:

Choose Options

Quantity:

Choose Options

Pelsue Standard Series Tents

Pelsue

$804.00 - $1,200.00

The Pelsue Standard Series Tents can be deployed rapidly and are easy to transport. They are great lightweight tents where extra functionality isn’t needed. The tents incorporate a dual zipper...

Quantity:

Choose Options

Quantity:

Choose Options

Pelsue Standard Tent 6514A

6514A

$6,053.00

Quantity:

Add to Cart

Quantity:

Add to Cart

Pelsue Trench Series Tents

Pelsue

$2,150.00

The Pelsue Trench Series Tents offer protection from the elements during trenching or boring operations. One-piece construction allows for easy set-up and break-down. There are openings on both ends...

Quantity:

Choose Options

Quantity:

Choose Options

Pelsue All-Weather Multi-Tent

Pelsue

$335.00 - $1,182.00

The Pelsue Multi-Tent can attach to a strand, bucket, ladder, pole, or manhole guard with the appropriate hardware. This tent is available with plastic hub (6334AP) instead of metal hub (6334A)...

Quantity:

Choose Options

Quantity:

Choose Options

Pelsue High-Rise Series Tents

Pelsue

$1,385.00 - $2,074.00

The Pelsue High-Rise Series Tents are ideal for use over tripod or davit rescue systems or on pole-mounted cabinets that require additional height. Main Features EXTRA HEIGHT

Quantity:

Choose Options

Quantity:

Choose Options

Pelsue Dual-Entry Series Tents

Pelsue

$1,282.00 - $1,723.00

The Pelsue Dual-Entry Series improves upon the Interlocking Series by adding a rear-access door for easy entry and exit when the front of the tent is closed off. Allows greater access to work on a...

Quantity:

Choose Options

Quantity:

Choose Options

Pelsue Manhole Heater: 1690D

Pelsue

1690D Heater

$2,828.00

Our Model 1690D When coupled with the 1325D Axial Ventilator, provides fresh warm air for all your confined space needs This unit is propane fired and electrically powered Materials &...

Quantity:

Add to Cart

Quantity:

Add to Cart

DIT Tent - Designed for Digital Imaging Technicians | Pelsue SolarShade Tent

Pelsue

SolarShade DIT Tent

$1,150.00 - $1,669.00

The Pelsue SolarShade® DIT Tent incorporates a special solar blocking material throughout the interior which is perfect for film and production crews. The material helps block solar gain as well as...

Quantity:

Choose Options

Quantity:

Choose Options

Pelsue Tent Heater

Pelsue Tent Heater

Related Products

Recently Viewed Products