Designed for applications requiring a large amount of output, this standard model blower has a ½ HP motor with an efficient six-blade impeller in a rugged metal housing. Certified to CSA Standard C22.2 No.113.
CONSTRUCTION:
- Complete unit epoxy powder coated in “safety orange”
- Interchangeable flange for intake/exhaust side mounting
- 18-gauge cold rolled steel housing
- 10-gauge steel bolted motor base
- Integrated carrying handles on four sides
- Steel/chrome plated grill
- Equipped with four rubber feet
- Stackable design
- Use with Adaptor Reducer (PN 9600-50) - to be used with 8” (20.3 cm) ducting
MOTOR:
- HP: 1/2 HP, 220V AC, 50 Hz, Single Phase
- Certifications: UL Listed, CSA Certified
- Max RPM: 1425
- Current Draw: 3.7A
- Cord: 25’ (7.62 m) 12/3 AWG, SJTW 90C 300V medium duty
- Switch: NEMA 5-15 (Grounded three-prong)
FAN:
- Glass reinforced Polypropylene (PPG) six blade fan, with aluminum hub
- Moving fan mounted 1 5/8” (4.12 cm) from grill for safety, grill gap-5/16” (0.79 cm)
- Grill gap – 5/16” (0.79 cm)
DUCTING:
- Retractable, non-collapsible design
- Single-ply, PVC coated, vinyl and polyester materials, temp. resistant up to 180° F (82.2° C)
- Class 1 hard drawn spring steel wire helix that meets ASTM 227 specs
DIMENSIONS:
| Length |
Width |
Height |
Weight |
| 14” (35.5 cm) |
18” (45.7 cm) |
18” (45.7 cm) |
47 lbs. (21.3 kg) |
FLOW RATES: (CFM calculated using 15’ (4.57 m) of 16” (40.6 cm) ducting)
| Free Air |
One 90° Bend |
Two 90° Bends |
| 3400 CFM (5776.63 m3/hr) |
2800 CFM (4757.23 m3/hr) |
2300 CFM (3907.72 m3/hr) |
