IAQ 3000 is a high quality, white, interior and exterior block filler formulated to fill small imperfections and pinholes in masonry block and porous concrete before top coating. IAQ 3000 contains mineral type fillers and fine mineral aggregates that fill voids in masonry surfaces. This 100% acrylic block filler is easy to apply, alkali resistant and provides a uniform surface capable of receiving all types of finish coats. IAQ 3000 is ideal for application to masonry block, concrete, brick and stone. IAQ 3000 is not water sensitive after application and its flexibility and durability are the best available for a block filler, far superior to cementitious and PVA type formulations.
High quality block filler formulated to fill small imperfections and pinholes in masonry block and porous concrete before top coating. Fiberlock IAQ 3000 is not water sensitive after application, and exhibits excellent flexibility and durability.
- Fills Imperfections and Pinholes in Masonry
- IAQ 3000 can be used for interior and exterior applications to fill in small holes or gaps to smooth out the surface of masonry or block substrates
- Brick and masonry block are often difficult surfaces to coat due to their porous nature
- IAQ 3000 is ideal for prepping these overly porous surfaces to be top coated
- Fiberlock IAQ 3000 is a high quality interior and exterior block filler formulated to fill small imperfections and pinholes in masonry block and porous concrete before topcoating
- This product contains mineral type fillers and fine silica aggregates which fill voids in masonry surfaces
- This 100% acrylic block filler is easy to apply, alkali resistant and provides a uniform surface capable of receiving all types of finish coats
- Fiberlock IAQ 3000 is not water sensitive after application and its flexibility and durability are the best available for a block filler, far superior to cementitious and PVA type formulations
- IAQ 3000 complies with the requirements for LEED EQ Credit 4.2, low-emitting materials: paints and coatings
Coverage:
- Smooth Surfaces: 200 ft2 /gal
- Porous Surfaces: 100-200 ft2 /gal
Drying Times (@ 70 - 77°F , 50% R.H.):
- To Touch: 4-8 hours
- To Recoat: 24 hours
- Minimum Application Temp: 50ºF (10ºC)
Product Specifications:
- Std Pkg UoM: 5 Gallon Container
- Std Pkg Qty: 5 Gallons
- Solids by Weight ± 2%: 65.8%
- Solids by Volume ± 2%: 45.9%
- Viscosity at 70°F: 112 Kreb Units
- Specular Gloss: 2-4º @ 60º
- Flash Point: Non-combustible
- Shelf Life: 36 Months Min. (Original Sealed Container)
- Calculated VOC: 81 grams/liter
