Pelsue Permanent Davit System - DK4248 Mast (42"/48" Offset) + DSS-F3 Flush Floor Mount Sleeve (Existing Concrete)

This configuration pairs the DK4248 mast (42"/48" offset reach, 48 lbs, structural aluminum, CP60 center post and EM01 elbow included) with the DSS-F3 Flush Floor Mount Sleeve, designed for existing concrete — drilled and bolted in, or welded or bolted into steel — and finished flush with the floor to reduce trip hazards in high-traffic areas. Setup takes about 5 minutes, and the system is man-rated to 310 lbs.

Permanent mount sleeves like this one provide:

• Always on site
• Provides greater offset reach
• Allows 360° pivot

Note: This listing combines the mast and sleeve only, you'll still need to add a hoist, Standard SRL, or 3-Way SRL (sold separately) plus its bracket (MB-PF1 for hoists, MB-FSB for Standard SRLs) to complete the system. The Davit System's universal bracket mounts one device, with an additional mounting location available for a second hoist or SRL if your application needs both.